GeekVape Aegis 100W Kit with Shield Atomizer

GeekVape Aegis 100W Kit with Shield Atomizer

INQUIRY DETAILS *

INQUIRY DETAILS
  • captcha

Product Detail

Product Introduction
Designed by Justin, Geekvape GM, alone with the chief designer of Heatvape Invader mini, the Aegis Kit is a combination of Shield Atomizer and a legendary TC box mod with that runs up to 100W with single 18650, 26650, 20700 or 21700 battery. The mod is designed to be waterproof, shockproof and dustproof by adopting advanced LSR Injection Moulding technology. And the tank with a capacity of 4.5ml is designed to meet your daily vaping needs.
Parameters
Capacity: 4.5ml
Kit Size: 37.8 * 46.8 * 135mm
Battery Size: 37.8 * 46.8 * 88mm
Battery Capacity: 1 * 18650/1 * 26650/1 * 20700/1 * 21700 ((battery adapter or cap needed)
Max Wattage: 100W
Connection Threading: 510
Operation Guide:

Airflow Adjustable: Bottom
Fill Liquid: Bottom
Battery Low Voltage Warning: 3.3V±0.1V
PCBA Temperature Safety Shutoff: 75°C
Maximum Firing Duration: 10 seconds
Maximum Voltage Duration: 9V±0.1V
Operating Temperature: -40°C-80°C
With Cell: No
Packing list
1 x Aegis Mod
1 x Shield Sub Ohm Tank (0.4ohm)
1 x 0.15ohm Coil Head
1 x Spare Silica Glass
1 x 20700/21700 Battery Cap
1 x 18650 Battery Adapter
1 x Silicone Seal Replacement
2 x Spare Torx Screw
1 x User Manual
Note:
Please read the user manual carefully before using this device.
Althought the mod is designed to be waterproof, dustproof and shockproof, it is highly recommended NOT TO EXPOSE it into water or damage it on purpose.
 

Related Products