Kangertech Dripbox 160w Kit

Kangertech Dripbox 160w Kit

INQUIRY DETAILS *

INQUIRY DETAILS
  • captcha

Product Detail

Product Introduction

Powered by two 18650 batteries, 160W Kangertech Dripbox TC Starter Kit inherits bottom feeder and squeeze mechanism from previous 60W Dripbox. You can enjoy dripping without actually dripping. With Max 160W output, it supports TC/VW modes.

Parameters

Dripmod 160

Height: 84mm
Max output: 160W
Juice capacity: 7ml
Battery: 2 x 18650 cell, 30A discharge (NOT included)
Charging: Micro USB port/DC5V/1000mA

Temp Range: 200F -600F/ 100°C -315°C
Suggested resistance: Ni200 (TC mode), Ti, SS at 0.05ohm or above; Nichrome wire at 0.1ohm or above.
Suitable resistance: 0.2ohm or above kanthal

Subdrip 160
Height: 26mm

Diameter: 22mm

Connection: 510 thread with juice delivery mechanism

Coil attach: Stainless steel DIY drip base; 0.25ohm ( 2 x 0.5ohm in parallel)

Replacement coil: Kanthal 0.2ohm (2 x 0.4ohm in parallel)

Airflow: adjustable

Packing List

  • 1 x Subdrip 160
  • 1 x Dripmod 160
  • 1 x DIY Drip base
  • 1 x replacement drip coil(kanthal)
  • 1 x accessory pack
  • 1 x extra juice tank
  • 1 x USB cable
  • 1 x Manual

Related Products