VAPEHAPPY’s .43 Sub Ohm Dual Coil Build NEW 8.5.2013

VAPEHAPPY’s dual coil build on a nimbus clone (chimbus) using 28 gauge kanthal resistance wire and 3mm silica wick. This build metered at .43 ohms =)

This video is showing you how MIKE does it. If you plan to do any modding please be sure to educate and yourself and be safe! YOU ARE BUILDING AT YOUR OWN RISK!

Hope this video was helpful! Vape on…. VAPEHAPPY! =)

Post time: Feb-22-2017