I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no value to me. This is my opinions and experience with the product, and is in no way intended to be the final hammer of judgment.
Not exactly sure what happened there with the blue wicks, I should point out that I was also using a CRYSTAL CLEAR juice from evapesok.com , no idea why the wick turned blue.
Out of the box this is just a JUNKY RBA , the airflow design is bad, just really bad. Now if you’re willing to do some drilling, which I totally understand if you are not. Normally I would not be, but this was simple enough to accomplish.
I got my little hand drill set here
Because of the soft aluminium top cap it is VERY easy to put a nice big hole right where you need it. Line up the hole with your coil and enjoy some big clouds of vapor. I did the toothpick trick I mentioned in the video ( blocking off the original airflow holes ) and that has eliminated the leaking problems I was having.
Remember when you are building your coils you WILL need to really crank those finger screws down hard. My “jumping ohms” was due to those not being tightened down enough.
All in all not to bad, out of the box it’s junky. There’s no reason why this should have come out in the condition that it’s in. With a new hole you can actually make this a pretty decent and easy to build RBA ( rebuildable )
thanks so much for watching everyone!
Post time: Dec-06-2019